Why do Pressure Washer Pumps need Protectors

by Taylore

A pressure washer pump can be thought of as an air compressor that has been specially designed to produce high-pressure water. It is even believed the pumps have specific effects on the costs of these machines. For example, many air compressors operate at pressures of between 100 and 150 PSI (pounds per square inch). A pressure washer pump, on the other hand, operates at pressures ranging from 1,000 to 5,000 or more PSI.

This high pressure puts a tremendous amount of stress on the pump’s pistons and o-rings, which are the parts that make the pumping action work. If anything goes wrong with these parts while they are operating at such high pressures, they can fail catastrophically, causing damage to all of the other parts in the pump.

A protector device allows you to prevent such catastrophic failure by reducing the amount of stress on the pistons and o-rings of your pump when it isn’t being used. How does it do this? By reducing the internal pressure of your pump before you turn off your engine or electric motor.

This is a solution that should be added to the machine’s water tank before every use, in order to protect the pump from wear and tear and keep it working as efficiently as possible for longer.

What does a pressure washer pump protector do?

The main purpose of a pressure washer pump protector is to stop your pressure washer from losing water pressure over time. This can have several benefits:

The most obvious one is that it helps your pressure washer last longer. When the pump loses water pressure, it causes wear and tear on the moving parts inside. As these parts break down over time, they become less efficient and are more likely to break completely; potentially causing thousands of dollars’ worth of damage to your precious equipment. A pump protector can prevent this by stopping wear and tear in its tracks, making sure your equipment lasts as long as possible.

When do I need to use pressure washer pump protector?

Pressure washer pumps are part of a closed-loop system, meaning they receive water from the water source, pressurize it and release it into your spray nozzle. The pump is designed to withstand the pressure of this process but can be damaged by debris in the water. As the pump pressures up, small particles typically get trapped in the seals or valves, which cause them to wear down prematurely.

To prevent this from happening, pressure washers have a built-in filter that stops these particles from entering the pump. However, this is not always effective because some debris is too small for the filter to remove. This is where pump savers come into play.

You should use pressure washer pump protector every time you store your pressure washer for winter or after each use if you don’t plan on washing again in the near future. The best way to make sure you’re protected against damage is to follow the instructions included with your product’s owner’s manual.

If you find that yours does not have a protective shield, then it is important that you take the time to clean up after yourself after each use. This means sweeping up any debris or dirt that might be left on the unit and wiping down the unit itself before storing it. You should wipe down all of the parts of the unit as well as any accessories such as hoses or nozzles so that they will be ready for use when it is time to use them again. If in need of newer pump model, visit the Giraffetools collections for the best deals.

You may also like

Leave a Comment